Altivar 71 manual

NOTE: Refer to the Altivar 71 programming manual for detailed information about the display terminal operations. PROGRAMMING PARAMETERS Example of accessing the acceleration ramp setting RDY Term +0.00 Hz REM 1 DRIVE MENU 1.1 SIMPLY START 1.2 MONITORING 1.3 SETTINGS 1.4 MOTOR CONTROL 1.5 INPUTS / OUTPUTS CFG Code >> T/K The Altivar 71 supports: • The 2-wire RS485 physical layer • The RTU transmission mode This manual describes how to set up the Altivar 71 drive on Modbus and also describes the Modbus services that are available on this drive. Notation Drive terminal displays The graphic display terminal menus are shown in square brackets. Altivar 71 Transition manual Altivar 71 Migration from ATV58(F) V ATV71 The purpose of this document is to help you replace an Altivar 58(F) with an Altivar 71 from version V1.1 ie01. Sphere of application: - Constant torque applications (see programming manual). If this fault is set to its factory configuration, the drive will stay locked in fault mode. Motor Line supply (input) Drive (output) Altivar 71 Power indicated on plate (1) Max. line current (2) Max. prospective line Isc Apparent power Max. inrush current (3) Nominal current In (1) Max. transient current for (1 View ATV71.pdf from ENGLISH 5017 at Asian International College. Altivar 71 Programming manual Variable speed drives for asynchronous motors Retain for future use Software V1.2 Contents Before you The Altivar 71 is factory-set for the most common operating conditions: • Macro configuration: Start/Stop. • Motor frequency: 50 Hz. • Constant torque application, with sensorless flux vector control. • Normal stop mode on deceleration ramp. • Stop mode in the event of a fault: freewheel. • Linear, acceleration and deceleration ATV61/71 CC-Link manual AAV49429 ATV61/71 Standard Fipio manual 1755883 ATV61 LonWorks card manual 1765273 ATV61 BACnet manual 1765274 This manual describes the differences between the Altivar 71 and the Altivar 58/58F. It explains how to replace an Altivar 58 or 58F, includi ng how to replace drives communicating on a bus or network. †Altivar®71 Installation Manual 75 to 700 HP, module no. 1755849 All documentation referenced in this bulletin is provided with the drive or on the CD-ROM included with the spare parts kits. You can also downIoad the documentation from the Technical Library at schneider-electric.us. email protected]< LAC- (Access level) Standard ;[email protected] ATV 78/ATV 61/71 Migration Manual This manual describes the differences between the Altivar 61/71 and Altivar 78 and explains how to replace an Altivar 78. 6 1760649 12/2009 Software enhancements Since the Altivar ATV 61 was first launched, it has benefited from the addition of several new functions. The software version is now V2.1. • This manual, already available on the CD-Rom supplied with each Altivar 71 • The PS 1131 software workshop • The online help • The standard function library • Program examples • The Altivar 71 parameters manual The standard function library contains: • Logic functions (AND, OR, etc) • Mathematical functions (Cos, Sin, Exp, etc) Manual—High Horsepower and ATV61 Programming Manual, document no. 30072-452-49. • Altivar® 71 Installation Manual 0.5 to 100 HP, module no. 1755843. • Altivar® 71 Installation Manual 75 to 700 HP, module no. 1755849. • Altivar® 71 Drive Controllers Errata to Bulletin atv71e_installation_manual_en_v3, document no. 30072-452-25. Manual—High Horsepower and ATV61 Programming Manual, document no. 30072-