Microcontroller (99)

Featured Discussions

Posting Guidelines (Read before posting)

Welcome to the Personal Mechatronics Lab Web forums. We hope you'll use this area productively. Before posting, please read these guideline…

Started by PMLLatest Reply

Discussions Replies Latest Activity

Finding the operation time

kk serious question, no jokes.how do you find elapsed time? either with timers or RTC? thanks!!

Started by Kenny Kim

18 Mar 13, 2016
Reply by xiaoyang

Stepping through the code?

Last minute desperate plea for simple advice: how do you step through the code on the pic? I've just been using the simulator until now...

Started by Kenny Kim

16 Mar 13, 2016
Reply by xiaoyang

Oscillator frequency

Anyone happened to know the command/register to select/lower internal oscillator frequency?

Started by Kenny Kim

9 Mar 13, 2016
Reply by xiaoyang

RTC code not working..

So my RTC code just stopped working. I've loaded code that worked a week ago and nothing - it gets hung on the macro which checks for the b…

Started by Kenny Kim

23 Mar 13, 2016
Reply by xiaoyang

Saving the value from keypad

Has anyone figured out how to store a result from the keypad without destroying it? I can only seem to define one button, as after that sec…

Started by Kenny Kim

26 Mar 13, 2016
Reply by xiaoyang

Laptop not recognizing the board

Hey guys, I recently updated my mac and i don't know if there is anything related, but i can't put the code into my board anymore. Sometime…

Started by Kenny Kim

4 Mar 13, 2016
Reply by xiaoyang

Board not responding!!

I have a problem!! Something wrong happened while I was trying to download code onto the devbugger board, and now my board has gone into de…

Started by Kenny Kim

5 Mar 13, 2016
Reply by xiaoyang

Problem when calling macros

Is any one else having a problem when calling macros? My code doesn't seem to work properly with macros especially when there are inline su…

Started by Kenny Kim

9 Mar 13, 2016
Reply by xiaoyang

Using W as source registers

I just found out the hard way(almost an hour of debugging in the simulator) that if you use W as the source register for the RRF and RLF in…

Started by Kenny Kim

2 Mar 13, 2016
Reply by xiaoyang

Timer0 interrupts in PIC18

Question about Timer0 interrupts on PIC18 - once the interrupt is triggered, does the timer keep incrementing? Or does it stop until the in…

Started by Kenny Kim

3 Mar 13, 2016
Reply by xiaoyang

RSS

© 2017   Created by PML.  

Badges  |  Report an Issue  |  Terms of Service