Bird house instructions

After assembly and the glue has dried, sand any rough edges and the surface using a sanding sponge or orbital sander and 120-grit sandpaper. Paint, stain or Shop This Project What Attracts A Bird To A Cut The Wood Pieces fileslib. Steps for Building a Birdhouse: Size the Pieces. Using a miter saw and the provided cut list, cut the 1x6 board and ¼-inch plywood pieces to size. Drill an Opening. Attach the Sides and Front. Add the Back. Mount the Base. Attach the Roof. Apply the Finish. Add a Hanger. Create your own homemade bird house using these free plans. Simple easy instructions allow Duration: 3:59 Posted:
Step 1. Cut the board using the birdhouse plans below. Step 2. Drill the entrance hole for the birdhouse. Step 3: Pre-drill the holes. Step 4: Assemble the
Should you drill holes in the bottom of a birdhouse? Drill four, 1/4-inch holes in the floor to provide drainage if water seeps in. The sides of a nest box should extend down beyond the floor so water won't leak in. Provide ventilation. Drill small holes (1/8 to 1/4-inch diameter) through each side of the birdhouse just below the roof.