Cisco phone system manual

© 2002, Cisco Systems, Inc. All rights reserved. 1 Cisco's IP Telephony Solution Cisco phone is installed at your desk. 2. Depending on your building activation, you may new phone are on your desk at the same time. You can use your new Cisco phone to place calls to become familiar with the new phone features. However, people who call you will still ring to your old phone until your activation time. 3. Connecting Your Cisco SPA 303 to the Network. STEP 1 Insert one end of the Ethernet cable into the network port on the phone body marked "SW" (labeled 3 in Figure 3 ). STEP 2 Insert the other end of the Ethernet cable into the appropriate device, such as a network switch, on your network. Cisco IP Phone 7821, 7841, and 7861 User Guide for Cisco Unified Communications Manager 10.0 (SIP) First Published: October25,2013 Last Modified: April16,2014 Americas Headquarters Contents vi Cisco IP Phone 7960 and 7940 Series User Guide 78-10182-08 Using the Speakerphone 1-14 Using the Headset 1-14 Customizing Your Phone From the User Options Web Pages 1-15 Logging In to the User Options Web Pages 1-16 Changing the Default Language for the User Options Web Pages 1-17 Establishing Cisco IP Phone Services 1-18 Subscribing to Services 1-19 SPA300 Series and SPA500 Series IP Phone with Cisco Unified Communications UC320W This guide helps you to get started using your IP Phone with the Cisco Unifie d Communications System UC320W. For details, see the phone user guide (links on page 2). NOTEFeatures depend on the phone model and the phone setup at your site. Cisco 8845 IP Phone User Reference 1 Handset and Handset light strip Indicates whether you have an incoming call (flashing red) or a new voice message (steady red). 2 Camera Use the camera for video calls. 3 Programmable feature buttons and line buttons Access your phone lines, features, and call sessions. 4 Softkey buttons Cisco phone to place calls to become familiar with the new phone features. However, people who call you will still ring to your old phone until your activation time. 3. Once your phone is activated, your old phone will no longer work. At this point, inbound calls will ring to your new Cisco phone. Once this has happened, we Cisco 7941 / 7961 IP Phone The Cisco 7961 and 7941 phones are exactly alike except that the 7941 has only two line buttons. Provide access to the voice mail system (when available), call histories, phone settings such as contrast and ring type, plus network configuration and status information. messages button of the Cisco IP Phone 8851 or 8851NR, or use the side or back USB port of the Cisco IP Phone 8861. To charge your tablet, use the back USB port of Cisco IP Phone 8861. 15 Intelligent Proximity (Applicable to Cisco IP Phone 8851 and 8861; not supported by the Cisco IP Phone 8851NR.) If your administrator has enabled this feature, you press Cisco IP Phone 8841, 8851, and 8861 User Guide for Cisco Unified Communications Manager 10.5 First Published: May29,2014 Last Modified: June06,2014 Americas Headquarters Cisco Unified IP Phone 7841 Manual 1 1Handset & light strip- Indicates whether you have an incoming call (flashing red) or a new voice message (steady red) 2Programmable feature buttons and line buttons- Access your phone lines, features, and call sessions. For more information, see Softkey, Line, and Feature Buttons Cisco Unified IP Phone 7841 Manual 1 1Handset & light strip- Indicates whether you have an incoming call (flashing red)