Marshall dsl1hr manual

It's a proper 2-channel amplifier in a 1-watt push-pull configuration, much like the Blackstar HT-1 or HT-5. It uses two 12AX7s in the pre-amp and a 12AU7 in the power-amp, and it outputs through a Celestion Eight-15 speaker. The classic gain has a volume knob; the ultra gain has both gain and volume knobs. Click to learn more about how we added some versatility to the classic Marshall tone. Download your manual Technical Specification General Model DSL5CR Range DSL Technology Valve Channels 2 (Split) Electronics Output wattage 5W (with power reduction option, 0.5W) Outputs 1 x 1/4" jack speaker output, 16Ω load only, 1 x 3.5mm jack emulated out The DSL1 is much friendlier at home volumes, though. Don't get me wrong, it's still capable of getting too loud for home use, but the 0.1w setting is usable, and the emulated out is quite good, imo. Be aware that the green channel stays much cleaner through the emulated output, as I think it is skipping the power amp section. misterg71 DSL1HR Range DSL Technology Valve Channels 2, ultra gain and classic gain Electronics Output wattage 1W with optional power reduction to 0.1W Outputs 1 x 1/4" jack speaker output, 16Ω load only, 1 x 3.5mm jack emulated line out Inputs 1 x 1/4" instrument jack, 1 x 3.5mm jack aux in, footswitch Controls Marshall DSL1HR in excellent condition with Mullard 12AU7 and 12AX7 Black Plate installed. Comes with power cable, footswitch, speaker cable, manual, original box and all that good stuff. Thanks for looking! Technical Specification General Model DSL20HR Range DSL Technology Valve Channels 2 (Split) "Ultra gain" and "classic gain" Electronics Output wattage 20W (with power reduction option to 10W) Outputs Speaker outputs: 3 x 1/4" jack sockets (16Ω load / 8Ω load), 1 x 3.5mm jack emulated line out Inputs Download your manual Technical Specification General Model DSL1CR Range DSL Technology Valve Channels 2, ultra gain and classic gain Electronics Output wattage 1W with optional power reduction to 0.1W Outputs 1 x 1/4" jack speaker output, 16Ω load only, 1 x 3.5mm jack emulated line out Inputs Holen Sie sich Ihr Benutzerhandbuch per E-Mail. Geben Sie Ihre E-Mail-Adresse ein, um das Handbuch zu erhalten von Marshall DSL20HR in der Sprache / Sprachen: Englisch als Anhang in Ihrer E-Mail. Das Handbuch ist 2,1 mb groß. Senden. Sie erhalten das Handbuch in Ihrer E-Mail innerhalb von Minuten. Wenn Sie keine E-Mail erhalten haben, haben This cabinet can also be used as an extension speaker for the Marshal DSL1C combo unit. The MMX112 has a single 12-inch 16-Ohm Celestion Seventy-80 speaker, making the Marshall 1-Watt amp sound "bigger," with more tonal range. Cabinet Dimensions: Width 500 mm / 19.7″ - Height 470 mm / 18.5″ - Depth 290 mm / 11.4″. DSL1HR OWNER'S MANUAL; Page 2 INTRODUCTION Congratulations on your purchase of this Dual Super Lead (DSL) amplifier from Marshall Amplification. The DSL provides the legendary Marshall tone, allowing you to express your distinct playing style and attitude. From clean to distorted overdrives, the DSL 1 is a versatile all valve amp that allows 33. May 18, 2018. #1. Decided to purchase the new Marshall DSL1 (not the 50th anniversary model) to see how it compared with the 50th anniversary models. Upon removing the chassis, I was quite surprised that this version had chassis mounted transformers. The 50th anniversary models had board mounted output transformer and an internal power 33. May 18, 2018. #1. Decided to purchase th