Shimano ultegra di2 user manual

Shimano ultegra di2 charging instructions When you buy a Di2 bike, it usually doesn't come with a Di2 manual. And even when it does, it's usually horribly outdated or full of information that you just don't need right now. On this page, I'll explain the basics di2 - everything you need to know to use your Di2 bike to its full potential. It is compatible with Dura-Ace 9070, Ultegra 6870 Di2 and Ultegra 6770 E-tube road shifting systems. SM-EWW01 plugs into the E-tube wiring system between existing components. It has an 2 wiring ports, so it can be connected between a front shifter and the Front Junction A, or at the rear derailleur (between rear derailleur and Etube wire.) (D) Di2 Adapter B EW-EX010 3 Open up the slit of the guide and pass the electric wires through it. 4 Connect the BOSCH Y-harness to the Di2 Adapter B and install the guide. NOTE Be sure to install the guide. If the guide is not installed, the weight of the Di2 Adapter B imposes a stress on the BOSCH Y-harness, and there is a possibility of wires Enlarge photo. Shimano's Ultegra Di2 group replicates the shift performance of the top-end Dura-Ace Di2 at a much lower price, if you can accept modest downgrades in weight and bulk. James Huang Combining SHIMANO's new DI2 platform and the road incarnation of Hyperglide+, the Ultegra R8150 front derailleur shifts between chainrings with the fastest, most seamless action on the market. Fastest ever front shifting, 45% faster than FD-R9150 Smaller, sleeker, lighter thanks to a reduced frontal area by 33% and a weight cut to 116g Shimano di2 ultegra user manual Forum home› Road cycling forum› Workshop I was wondering if anyone can post a link to a simple/quick user guide for Di2 (Ultegra 6770, if specifics are needed). I've done some searching, and all I can find is the Shimano manuals (which are split by component). I'm looking for something that just gives me the I was wondering if anyone can post a link to a simple/quick user guide for Di2 (Ultegra 6770, if specifics are needed). Toggle navigation. and all I can find is the Shimano manuals (which are split by component). I'm looking for something that just gives me the basics of how to use (or, I've figured that one out!), basic maintenance, when In 1982, Shimano 105 was launched to the cycling world, slotting beneath Dura-Ace and Shimano 600 Series (later rebranded Ultegra). The new road group quickly gained popularity as a budget-friendly platform that delivered high-level functionality trickled down from higher-end models.