Zhone mxk configuration guide

Command Line Interface. Clear the system log. Enter Configuration mode. Copy from one file to another. Set the time zone and date format. If user is in User mode, positions interface at top of menu tree. Terminate current session. Download or apply new firmware. Enable or disable paging ( more prompt) for this session. The MXK-F™ chassis architecture is designed around a dual star design with redundant ultra high-speed links to each subscriber line card slot for future-proof support of today's and tomorrow's bandwidth-hungry fiber-based subscriber services. Also MXK-F™ management control and aggregation switch fabric functions reside on two separate cards, each of which can be equipped in a redundant Administrative user name is admin, password is zhone. MXK Configuration Guide 61 MXK Operations, Administration, and Maintenance. A single record for the Ethernet interface on the uplink card in slot a exists. No other profiles to configure physical interfaces exist. The uplink card in slot a is enabled. MXK-F Hardware and Installation Guide Manual MXK-CHASSIS F1421, MXK-CHASSIS F1419, Zhone Technologies Inc. MXK-CHASSIS F1421, MXK-CHASSIS F1419, Zhone Technologies Inc. Anatel 01230-16-01613 operating details MXK-F™ Chassis - MXK-F1421 is designed to be fully-compliant to meet the ETSI EN 300 standard for indoor cabinets and contains 16-access multi-service subscriber slots, and 2-network facing slots. MXK-F1421 can be mounted directly into a 21″ wide rack, and into a 23″ rack with adapter brackets. The chassis is equipped with a cable MXK 319 3U: 13.3 x 43.8 x 28.3 cm, Line Cards: 7; Front Card Access Unit Level: Terminal for Command Line Interface , Web GUI based Management MXK 819: 8U: 35 .5 x 43.8 x 28.3 cm, Line Cards: 14; Front Card Access Network Level: Zhone Management System via SNMP v2c for GUI, with The largest MXK-F1421 chassis supports up to 256 OLT ports, and with 128-splits and the use of Class C+ optics, the platform can support up to 32,768 ONTs. SLMS As with all products within the MXK™ portfolio, MXK-F™ utilizes DZS's proven SLMS™ access operating system, providing intelligent, MXK Configuration Guide—describes how to configure the MALC for routing, for bridging and a number of other configurations. FTTx Application Guide—explains how to configure GPON and Active Ethernet zNIDs in a procedures which encompass commands for both the MXK and the zNIDs as a single total solution. While Zhone offers a full line of outside cabinets engineered specifically to support MXK-F platforms with a wide range of powering, and fiber termination options, all Zhone MXK-F™ chassis are ETSI indoor cabinet compliant. This means that any MXK-F™ can be mounted within a 300mm deep cabinet, or two of them can be mounted back-to-back in a Zhone offers a full line of outside cabinets engineered specifically to support MXK platforms. Multiple configurations are available for deployments from small to large scales, with a wide range of powering, protection, and line termination options. Technical Specifications %""54&)&5MXK: Intelligent Terabit Access Concentrator Dimensions MXK Product Profile Bandwidth Bandwidth Changes Changes Everything! Everything! LEARN MORE Experience the Network of the Future Today Experience The Next Wave of Access Network Evolution As telecom operators face ever more competition, they are experiencing an accelerating shift in the demands placed on their access networks. Over the past s