Cancer and Interventional Radiology World Conference (CIRWC) 2024
We are pleased to extend a cordial invitation for the upcoming Cancer and Interventional Radiology World Conference CIRWC 2024, scheduled from September 7 to 9, 2024. The conference will be conducted in a hybrid format in San Francisco, California, USA.
Conference theme: “Advances in Cancer Research and the Role of Interventional Radiology in Cancer Staging and Diagnosis."
Cancer…
ContinueAdded by Denise Appel on February 26, 2024 at 5:36am — No Comments
Precision global Conferences cordially invite you to our 2nd edition World Nursing Science Conference (WNSC 2024) HYBRID EVENT Date 7-9 September 2024 in San Francisco, California, USA.
Conference theme :" Advances in Modern Nursing Practices and Exploring the Frontiers of Nursing Science."
We cordially invite you to 2nd Edition of World…
ContinueAdded by Kate Flores on February 14, 2024 at 5:12am — No Comments
Infectious Diseases World Conference IDWC 2024
Precision global Conferences cordially invite you to our conference Infectious Diseases World Conference (IDWC 2024) HYBRID EVENT September 7 to 9, 2024, San Fransico, California, USA
Conference theme: "Infectious Diseases: A Global Health Concern".
The Infectious Disease World Conference IDWC 2024, September 7 to 9, 2024, at San Fransico, CA,…
ContinueAdded by Catherine Rose on February 14, 2024 at 2:12am — No Comments
Cancer and Interventional Radiology World Conference (CIRWC) 2024
We are pleased to extend a cordial invitation for the upcoming Cancer and Interventional Radiology World Conference CIRWC 2024, scheduled from September 7 to 9, 2024. The conference will be conducted in a hybrid format in San Francisco, California, USA.
Conference theme: “Advances in Cancer Research and the Role of Interventional Radiology in Cancer Staging and Diagnosis."
Cancer…
ContinueAdded by Denise Appel on February 14, 2024 at 1:53am — No Comments
Dementia World Conference DWC 2024
Precision global Conferences cordially invite you to our conference Dementia World Conference (DWC 2024) HYBIRD EVENT Date 04-06 September 2024, San Francisco, CA, USA
Conference theme: “Exploration of Clinical Interventions in Dementia Care and Research.”
The Dementia World Conference DWC 2024 goal is to push the boundaries of knowledge within the domain of…
ContinueAdded by Eric Paul on February 14, 2024 at 1:47am — 1 Comment
Addiction World Conference AWC 2024
Precision global Conferences cordially invite you to our conference Addiction World Conference AWC 2024, scheduled from September 4 to 6, 2024. The conference will be conducted in a hybrid format in San Francisco, California, USA.
Conference theme: “New Frontiers in Addiction Science and Treatment”
Addiction World Conference (AWC 2024) is committed to advancing…
ContinueAdded by Jesicca Joe on February 14, 2024 at 1:41am — No Comments
Precision global Conferences cordially invite you to our 2nd edition World Nursing Science Conference (WNSC 2024) HYBRID EVENT Date 7-9 September 2024 in San Francisco, California, USA.
Conference theme :" Advances in Modern Nursing Practices and Exploring the Frontiers of Nursing Science."
We cordially invite you to 2nd Edition of World…
ContinueAdded by Kate Flores on February 14, 2024 at 1:33am — No Comments
Plant Science and Molecular Biology Conference PMWC 2024
Precision global Conferences cordially invite you to Plant Science and Molecular Biology World Conference PMBWC 2024, scheduled from August 17 to 19, 2024. The conference will be conducted in a hybrid format in Barcelona, Spain and Virtually.
Conference theme; "Exploring the Interplay of Plant Biology and Molecular…
ContinueAdded by Kyle Irving on February 14, 2024 at 1:22am — No Comments
Neutron Detection Equipment Market Analysis 2024-2032
The Global Neutron Detection Equipment Market report provides information about the Global industry, including valuable facts and figures. This research study explores the Global Market in detail such as industry chain structures, raw material suppliers, with manufacturing The Neutron…
ContinueAdded by robinyoung on February 9, 2024 at 1:03am — No Comments
Plant Science and Molecular Biology Conference PMWC 2024
Precision global Conferences cordially invite you to Plant Science and Molecular Biology World Conference PMBWC 2024, scheduled from August 17 to 19, 2024. The conference will be conducted in a hybrid format in Barcelona, Spain and Virtually.
Conference theme; "Exploring the Interplay of Plant Biology and Molecular…
ContinueAdded by Kyle Irving on February 8, 2024 at 2:06am — No Comments
I faced several problems while working on the PIC to PC communication portion of the programming. Here are some of the major issues with my solutions:
1. Hyperterminal not found.
It seems like Windows 7 does not come with Hyperterminal software. Pretty simple fix: go to the Dropbox link I attached below and download hypertrm.dll and hypertrm.exe. Double clicking hypertrm.exe should start Hyperterminal. If not, try moving these files into C:\Program Files\Windows NT and…
ContinueAdded by Soon Kyu Lee on March 12, 2013 at 11:42pm — No Comments
Few things that took me a while to figure out:
1. When using high and low priority interrupts, GIEH must ALSO be enabled along with GIEL (bits 7 and 6) for low priority interrupts to occur.
2. Even when interrupts are not enabled (such as external interrupts on INT0), these are still being flagged. Thus, if there are multiple sources of interrupts and if the interrupt source checking is not handled carefully, disabled interrupt routines may still occur. For example, in my…
ContinueAdded by Soon Kyu Lee on February 22, 2013 at 2:18am — No Comments
Code given in textbook is something like this:
WR_INS
bcf RS ;clear Register Status bit
movwf temp_lcd ;store instruction
andlw 0xF0 ;mask 4 MSB
movwf LATD ;send 4 MSB
bsf E ;pulse enable high
call delay5ms
swapf temp_lcd, 0 ;swap nibbles (result into WREG)
andlw 0xF0 ;mask 4 LSB
bcf E
movwf LATD ;send 4 LSB
bsf E ;pulse enable high
nop
bcf E
call delay5ms ;allow time for change
return
But this does not…
ContinueAdded by Soon Kyu Lee on February 3, 2013 at 5:00pm — No Comments
The final runs and presentation are over. Though the results were not what I had hoped for, I can't help but feel proud of what our team has accomplished this term.
What I Learned in AER201
1. Never give up. Perseverance is key to success in this course - a lot of challenges and adversity will occur through failed ideas or damaged machines, but sometimes the best solutions are born from the most desperate situations.
2. Advanced Planning and Organization is…
ContinueAdded by Abigail Amu on April 10, 2012 at 4:03pm — No Comments
Next week is the second team eval! I can't believe it is this close.
Today was focussed on working together to get the machine ready for a full run. Wiring was secured in place with electrical tape in order to ensure that it was neat and out of the way of actuating motors, a plexiglass mount was made for the PIC board, the arm was reattached and the right gear was re-epoxyed onto the motor. Also, the problem we were having with the rear-right wheel not touching the ground…
ContinueAdded by Abigail Amu on March 20, 2012 at 7:21pm — No Comments
Following the integration and test runs that our group conducted today (http://www.youtube.com/watch?v=t1eQQthAIcE&feature=player_embedded), I brought the robot home and fixed some bugs in the circuit and the code. In my final test run, the robot was able to detect all 7 garbage bins, identify their colours, and store their locations. Some pictures of the final UI were taken and have been uploaded into…
ContinueAdded by Tongbin Wu on March 10, 2012 at 11:00pm — No Comments
Today was the EngSci open house day, and as we were volunteering to talk about AER201 in the common room we were also able to get a lot accomplished.
Though the wiring had been finished before hand, each wire needed to be tinned and then soldered into its respective spot. Once everything was connected and soldered in place by Mason, and each sensor's connectivity was tested and deemed successful, we loaded Tom's program onto the pic and connected his development board to the sensor…
ContinueAdded by Abigail Amu on March 10, 2012 at 9:44pm — No Comments
Yesterday the main goal of the lab session was to finish mounting all of the sensors, wire them up, and get ready to connect everything together. Mason and Tom were finishing up the sensor circuit board and the pic board respectively, and I took the time to mount the IR range sensors to the base and break beam sensors to the upper section of the arm. I also ran wire through the base from the sensor to the approximate spot where the sensor board will be mounted on our robot. I'll have to get…
ContinueAdded by Abigail Amu on March 7, 2012 at 11:34pm — No Comments
Today I asked Prof. Emami for the circuit diagram of the RTC module. I was then able to make that circuit and integrate it with the PIC Board and my LCD. For those who would like to make their own RTC module, I have uploaded the circuit diagram in my photo section. Be sure to check it out because it really saves you a lot of time.
Below is a video of the working circuit on protoboard:…
ContinueAdded by Tongbin Wu on March 5, 2012 at 10:00pm — No Comments
Last week, two programmers Kevin Tan and I worked on the circuits for keypad and LCD. As our groups both use the PIC boards to save money for our circuit and electromech members, we designed and assembled the two circuits and connected them to the PIC. They only require some capacitors, resistors, wires and two IC's. Below is a link to a video documenting the results of our work.
Added by Tongbin Wu on March 5, 2012 at 2:06am — No Comments
2024
2023
2018
2016
2015
2014
2013
2012
2011
2010
2009
1999
1991
1990
1989
1988
1987
1986
1985
1984
1983
1982
1981
1980
1979
1978
1977
1976
1975
1974
1973
1972
1971
1970
1969
1968
1967
1966
1965
© 2024 Created by PML. Powered by